Sprinkler Valve Repair
Diagnose valves that chatter, seep, stay open, or leave an entire zone inactive.
Explore this serviceMontgomery County sprinkler service
Controller & Wiring Repair in New Caney, Texas
Builder programs in New Caney are a frequent cause of overnight watering and overlapped start times. The schedule is read before the timer is replaced.
Common warning signs
When to schedule an inspection
- The display is blank or resets
- Schedules run at the wrong time
- Only certain zones show an error
- A rain sensor prevents normal watering
Our approach
A repair process built around evidence
Irrigation components work together. Checking the affected path separates the symptom from the cause.
01
Review programs and power supply
02
Test terminals and field wiring
03
Repair faults or discuss controller options
04
Program and demonstrate the final schedule
A blank display is a power question first: outlet, transformer, and the controller fuse or reset. A display that works while one zone does nothing is usually a terminal, a field wire, or the valve on that zone.
Rain sensors and rain-delay settings stop watering on purpose. We read the controller status before treating a pause as a failure. After a storm, a sensor that is stuck closed will keep the yard dry until it is cleaned or bypassed correctly.
Replacing the timer is the right call when the display, transformer, or output terminals have failed and parts are no longer available. A new controller will not repair a cut wire in the yard, so the field side is tested either way.
Also in New Caney
Related repairs nearby
Keep exploring
Related sprinkler services
Sprinkler System Tune-Up
A full-zone inspection and adjustment before heat, travel, or a new watering season.
Explore this serviceCoverage & Drainage Correction
Solve dry strips, overspray, runoff, and mismatched irrigation after landscapes change.
Explore this serviceQuestions about this repair
The display is blank. Does that mean I need a new timer?
Not always. Power, the transformer, and a reset come first. A new controller is recommended when those checks fail and the unit cannot be repaired.
One zone shows a fault and the others run. What does that mean?
The controller is at least partly alive. That pattern points at the wire, solenoid, or valve for the faulted zone.
Request controller & wiring repair in New Caney
Ready for a better watering cycle?
Tell us what your sprinkler system is doing.
Share the symptoms, your city, and the best phone number. We follow up to plan the next step.